Warning: include(/sii/begin2.htm): failed to open stream: No such file or directory in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 18

Warning: include(): Failed opening '/sii/begin2.htm' for inclusion (include_path='D:\XAMP\php\PEAR') in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 18
   
 
Warning: include(/sii/maritim.htm): failed to open stream: No such file or directory in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 35

Warning: include(): Failed opening '/sii/maritim.htm' for inclusion (include_path='D:\XAMP\php\PEAR') in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 35


Статьи:

ЗАМЕНА ЛОПАСТЕЙ

логотип Pro Pulse

ЗАМЕНА ЛОПАСТЕЙ


Unscrew and remove all four bolts Dismantel the ring Rear hub section Assemble the rear hub section
Position the blades in the recesses. Set the pitch as shown in the separate description. Set the pitch as shown in the separate description. Tighten the bolts, firmly but without excessive force.

  1. Unscrew and remove all four bolts (7) from the propeller.
  2. Dismantel the ring (4) and the rear hub section (3) so that the blades are separated, then remove the damaged blade.
  3. Assemble the rear hub section (3) and the ring (4).
  4. Position the blades in the recesses. Make sure that the arms from the blades enter the recesses in the ring. Do not use excessive force.
  5. Assemble the adapter (1) and the front hub section (2) into position.
  6. Fit the bolts and tighten until about 4 turns remain.
  7. Set the pitch as shown in the separate description.
  8. Tighten the bolts, firmly but without excessive force.


 

Warning: include(/sii/end.htm): failed to open stream: No such file or directory in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 89

Warning: include(): Failed opening '/sii/end.htm' for inclusion (include_path='D:\XAMP\php\PEAR') in D:\www\www.water-mir.spb.ru\akses\text\pro-pulse-01.shtml on line 89